Sign in | Join free

Benchmarks – and so much more

Benchmarks – and so much more Source:
Date: 08-03-2013
Visits: 251
Very Poor

How the textile industry can benefit from USTER®STATISTICS

The new 2013 edition of USTER®STATISTICS – the only globally-accepted benchmarks for textiles – has just been launched, with an improved online interface. Users can forecast exactly how a yarn will perform throughout the processing sequence, for any given application, by matching the yarn quality parameters against USTER®STATISTICS values. That means USTER®STATISTICS are more than just benchmarks – they are vital guidelines for production excellence along the entire textile chain.

The new USTER®STATISTICS2013 online tool at (see USTER®STATISTICS under the ´Service´ tab) now offers notable improvements, with extra features and additional yarn styles and parameters included in the wide range of USTER’s global benchmarks. Of special interestfor mills producing yarns for knitted fabrics are the quality parameters for hairiness.

For the first time, the new USTER®STATISTICSinclude S3 hairiness measurements: this is the global quality parameter – for ring and compact yarns – referring to the number of fibers protruding by 3 mm and more. This breakthrough was enabled with the launch in June 2010 of the USTER®ZWEIGLE HL400, taking S3 hairiness classification to the next level.

This instrument offers improved accuracy and now operates at test speeds of 400 m/min. With a statistical variation of less than 10%, the USTER®ZWEIGLE HL400 allows Uster Technologies to include the critical S3 values in USTER®STATISTICS.
Hairiness in practice

Precise analysis of yarn hairiness is vital for many textile applications, as hairiness has a significant influence on both the appearance and durability of fabrics. Experience with textile fabrics has shown that 15% of unacceptable fabric defects – such as pilling – are caused by high levels of hairiness or hairiness variations.

Yarns with higher hairiness levels also tend to generate more fly in the knitting machine, affecting its performance by causing stops and breaks, as well as fabric defects. Both vertical knitting mills and independent spinners should take note that yarns with high S3 levels are likely to impact on fabric appearance and durability, as well as on the productivity and efficiency of subsequent processing stages. The negative impact of high hairiness levels on productivity is also likely to generate a large number of complaints.
Elongation in practice

Mills producing yarns for weaving require other essential quality parameters. In weaving, yarn strength and elongation are very important yarn characteristics, as also is the degree of variation in these characteristics.

Yarn producers need to keep in mind, for example, that the loss of elongation during sizing varies from at least 0.6% for a ring-spun cotton yarn to 1.5% for an OE cotton yarn, even with ideal sizing machine settings. Residual elongation is important, because during weaving each warp end has to withstand, in most cases, well over a thousand cycles of extension and relaxation, during which no breaks should happen. To keep warp breaks within acceptable levels, the residual elongation after sizing should never be lower than 3 to 4%. This difference in performance is exactly reflected in the USPTM levels. In this specific example, the 25% level in elongation is expected to behave much better than the 90% level, in terms of performance for warping.

The elongation values shown in USTER®STATISTICS are measured by the USTER®TENSOJET 4, which has the testing power to forecast yarn performance accurately. It measures tensile strength over 100,000 breaks – at a rate of 30,000 breaks per hour. That means it can detect yarn faults or isolated weak places. The USTER®TENSOJET 4 is clearly essential for testing yarns for weaving, where stresses are great.
The common quality language

The impact that quality parameters will have on applications – such as the level of protruding fiber significantly influencing the pilling effect – can be described simply and precisely using USTER®STATISTICS. Therefore, data such as S3 hairiness, elongation levels and other quality parameters are vital – and thus should be defined beforehand in yarn profiles and used as the basis for buying and selling of yarns. Defining quality parameters based on USTER®STATISTICS is akin to using a common language to define precise quality factors along the entire production chain, heightening the understanding between producers and users. This underlines the importance of USTER®STATISTICS in understanding and communicating the quality of yarns being traded – as benchmarks, and so much more
like 144 Unlike 16
Users Comments
No comments to display
Are you sure you want to delete this comment.
Add your comment
User Name:
Email: Will not be published
Rate This article:
Maximum 3500 characters
Your name
Your email address
Your friend email address
  • /images/ourservices/125-600/pricetrend.jpg
  • /images/ourservices/125-600/product.jpg
  • /images/ourservices/125-600/videos.jpg
Suntex Asia Limited
32367 Users
have already joined Shouldn't you?
Full registration will provide you access to all our free services. It takes only one minute and it is free Go here
Quick registration (it's free)
Accesss to some of our free services
Select membership
Full Name
User Name
Enter the code
(Note: If you can't read the letters, reload the page to generate a new one.)
terms and conditions
Members Login
Already registered
Forgot your password
golden fees
Enter your e-mail address
Choose your room